Free vibration analysis of rotating Timoshenko beams with multiple delaminationsYANG LIU; DONG WEI SHU.Composites. Part B, Engineering. 2013, Vol 44, Num 1, pp 733-739, issn 1359-8368, 7 p.Article

Tapered hygro-thermally curvature-stable laminates with non-standard ply orientationsYORK, Christopher B.Composites. Part A, Applied science and manufacturing. 2013, Vol 44, pp 140-148, issn 1359-835X, 9 p.Article

Reliability in composites - A selective review and survey of current developmentCHIACHIO, Manuel; CHIACHIO, Juan; RUS, Guillermo et al.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 902-913, issn 1359-8368, 12 p.Article

A layered limit analysis of pinned joints composite laminates: Numerical versus experimental findingsPISANO, A. A; FUSCHI, P; DE DOMENICO, D et al.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 940-952, issn 1359-8368, 13 p.Article

Failure mechanisms in twill-weave laminates: FEM predictions vs. experimentsNICOLETTO, Gianni; RIVA, Enrica.Composites. Part A, Applied science and manufacturing. 2004, Vol 35, Num 7-8, pp 787-795, issn 1359-835X, 9 p.Conference Paper

Vibration damping for crack detection in composite laminatesKYRIAZOGLOU, C; LE PAGE, B. H; GUILD, F. J et al.Composites. Part A, Applied science and manufacturing. 2004, Vol 35, Num 7-8, pp 945-953, issn 1359-835X, 9 p.Conference Paper

Analytical solutions of heterogeneous rectangular plates with transverse small periodicityHE, Wen-Ming; HUA QIAO; CHEN, Wei-Qiu et al.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 1056-1062, issn 1359-8368, 7 p.Article

Study of critical buckling loads and modes of cross-ply laminated annular platesSEIFI, Rahman; KHODA-YARI, Nafiseh; HOSSEINI, Hamid et al.Composites. Part B, Engineering. 2012, Vol 43, Num 2, pp 422-430, issn 1359-8368, 9 p.Article

Experimental and numerical study of reinforced concrete specimens strengthened with composite platesMULLER, Mickael; TOUSSAINT, Evelyne; DESTREBECQ, Jean-Francois et al.Composites. Part A, Applied science and manufacturing. 2004, Vol 35, Num 7-8, pp 885-893, issn 1359-835X, 9 p.Conference Paper

Vibration analysis of laminated composite conical shells by the method of discrete singular convolution based on the shear deformation theoryCIVALEK, Ömer.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 1001-1009, issn 1359-8368, 9 p.Article

The engineering aspects of automated prepreg layup: History, present and futureLUKASZEWICZ, Dirk H.-J. A; WARD, Carwyn; POTTER, Kevin D et al.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 997-1009, issn 1359-8368, 13 p.Article

Optimized sinusoidal higher order shear deformation theory for the analysis of functionally graded plates and shellsMANTARI, J. L; SOARES, C. Guedes.Composites. Part B, Engineering. 2014, Vol 56, pp 126-136, issn 1359-8368, 11 p.Article

Optimum laminate design by using singular value decompositionERSOY, Hakan.Composites. Part B, Engineering. 2013, Vol 52, pp 144-154, issn 1359-8368, 11 p.Article

Three-dimensional state space spline finite strip analysis of angle-plied laminatesATTALLAH, K. M. Z; YU, M; YE, J. Q et al.Composites. Part B, Engineering. 2014, Vol 66, pp 25-35, issn 1359-8368, 11 p.Article

Matrix cracking behaviors in carbon fiber/epoxy laminates filled with cup-stacked carbon nanotubes (CSCNTs)YOKOZEKI, Tomohiro; IWAHORI, Yutaka; ISHIWATA, Shin et al.Composites. Part A, Applied science and manufacturing. 2007, Vol 38, Num 3, pp 917-924, issn 1359-835X, 8 p.Article

Experimental and numerical investigation on bolted composite joint made by vacuum assisted resin injectionSONG ZHOU; ZHENQING WANG; JIANSHENG ZHOU et al.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 1620-1628, issn 1359-8368, 9 p.Article

Non-linear flexural and dynamic response of CNT reinforced laminated composite platesBHARDWAJ, G; UPADHYAY, A. K; PANDEY, R et al.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 89-100, issn 1359-8368, 12 p.Article

Stiffness and strength analysis of four layered laminate bamboo composite at macroscopic scaleVERMA, C. S; CHARIAR, V. M.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 369-376, issn 1359-8368, 8 p.Article

A unified formulation of RMVT-based finite cylindrical layer methods for sandwich circular hollow cylinders with an embedded FGM layerWU, Chih-Ping; CHANG, Yu-Tsao.Composites. Part B, Engineering. 2012, Vol 43, Num 8, pp 3318-3333, issn 1359-8368, 16 p.Article

Analytical model for laminated-glass plateFORABOSCHI, Paolo.Composites. Part B, Engineering. 2012, Vol 43, Num 5, pp 2094-2106, issn 1359-8368, 13 p.Article

On the applicability of simple shapes of delaminations in buckling analysesOBDRZALEK, V; VRBKA, J.Composites. Part B, Engineering. 2011, Vol 42, Num 3, pp 538-545, issn 1359-8368, 8 p.Article

Analysis of laminated shells by a sinusoidal shear deformation theory and radial basis functions collocation, accounting for through-the-thickness deformationsFERREIRA, A. J. M; CARRERA, E; CINEFRA, M et al.Composites. Part B, Engineering. 2011, Vol 42, Num 5, pp 1276-1284, issn 1359-8368, 9 p.Article

Dynamic analysis of composite coil springs of arbitrary shapeCAHM, Faruk Firat.Composites. Part B, Engineering. 2009, Vol 40, Num 8, pp 741-757, issn 1359-8368, 17 p.Article

Modelling of fatigue crack tunneling and delamination in layered compositesSUIKER, Akke S. J; FLECK, Norman A.Composites. Part A, Applied science and manufacturing. 2006, Vol 37, Num 10, pp 1722-1733, issn 1359-835X, 12 p.Article

Linear and nonlinear analysis of bond-slip models for interfaces between FRP composites and concreteBISCAIA, Hugo C; CHASTRE, Carlos; SILVA, Manuel A. G et al.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 1554-1568, issn 1359-8368, 15 p.Article